Contents: 8 straight tracks, 2 curved tracks, 2 electric curved turnouts, a control box, a distribution strip, wire, plugs and sockets, and instructions.

The SET extension set program is a progressive system with which you can…

Length 110 mm / 4-3/8".

Length 55 mm / 2-3/16".

Length 25 mm / 1".

Length 108.6 mm / 4-1/4". For adjusting length on the 8559 crossing and 8560 double slip switch.

Length 112.8 mm / 4-7/16". Same length as the straight length of 8559 crossing and 8560 double slip switch.

Radius 145 mm / 5-3/4". 45°.

Radius 195 mm / 7-11/16". 45°.

Radius 195 mm / 7-11/16". 30°.

Radius 195 mm / 7-11/16". 30°. Terminal clips included. A passing train activates the function.

Radius 220 mm / 8-11/16". 45°.

Radius 220 mm / 8-11/16". 30°.

Radius 220 mm / 8-11/16". 30°. Terminal clips included. A passing train activates the function.

Length 112.8 mm / 4-7/16". 13°.

Length 112.8 mm / 4-7/16". 13°. Radius 323 mm / 12-3/4".

Length 110 mm / 4-3/8". 13°.
Radius 490 mm / 19-1/4".The 8562 left and the 8563 right turnouts have double solenoid mechanisms and manual hand levers. They can be activated with the 7272/72720 control box or with circuit tracks.

Length 110 mm / 4-3/8". 13°. Radius 490 mm / 19-1/4".

Length 110 mm / 4-3/8". 13°. Radius 490 mm / 19-1/4".

Radius 195 mm / 7-11/16". 30° (same as 8521.) Main track length 25 mm / 1".

The 8568 left and the 8569 right curved turnouts as well as the 8560 double slip switch have double solenoid mechanisms and manual hand levers. They can…

Radius 195 mm / 7-11/16". 30° (same as 8521.) Main track length 25 mm / 1".

The 8568 left and the 8569 right curved turnouts as well as the 8560 double slip switch have double solenoid mechanisms and manual hand levers. They can…

Length 55 mm / 2-3/16". Terminal clips included. One rail is gapped in the middle.

Length 110 mm / 4-3/8". Interference suppressor included. 2 permanently connected wires for track current.

Complementary curve for turnouts. 13°. Radius 490 mm / 19-1/4". Same curve as the branch on the 8562 L, 8563 R, 8565 L and 8566 R turnouts.

Adjustable in length from 100 to 120 mm / 3-15/16" to 4-3/4" for situations where a standard section will not fit.

The track bumper has an LED for a lighted lantern. Length 16 mm / 5/8". The track bumper can be screwed to the end of the track. Wood screw included.

For electrically separating rails or for creating an electrical rail joint.
Two (2) insulated rail joiners or two (2) regular rail joiners are required in either case.
This set includes material for five (5) separation points and…

Length 15 mm / 19/32". The track bumper can be clipped to the rails.